Contents - Table Of Contents
- Table Of Contents
- Table Of Contents
- Overview
- Product documentation, M2004
- How to read the product manual
- Safety
- General Safety Information
- Safety Risks
- Safety risks related to tools/workpieces
- Safety risks related to pneumatic/hydraulic systems
- Safety risks during operational disturbances
- Risks associated with live electric parts
- Safety related Instructions
- DANGER - Moving robots are potentially lethal
- DANGER - First test run may cause injury or damage
- WARNING - The unit is sensitive to ESD
- WARNING - Safety risks during work with gearbox oil
- Installation and Commissioning
- Structure Manipulator
- Unpacking
- Transport
- Pre-installation procedure
- Assemble the robot IRB360
- Working range and type of motion
- On-site installation
- Lifting robot with roundslings
- Amount of required space
- Orienting and securing the robot cage
- Orienting and securing the robot
- Manually releasing the brakes
- Fitting equipment on robot
- Loads
- Installation of Options
- Installation of (optional) customer connections IRB 360
- Installation of Vacuum System (Optional)
- Electrical connections
- Connecting the controller to the manipulator
- Manipulator Cables IRB360
- Maintenance
- Regular Maintenance
- Maintenance schedule and component life
- Inspection activities
- Telescopic Shaft, Wash Down, Axis 4
- Telescopic Shaft, Stainless, Axis 4
- Vacuum System (optional)
- Bar System
- Joint Balls
- Upper Arms
- Hoses
- Spring Units
- Movable plate with swivel
- Replacement/changing activities
- Lubrication activities
- Cleaning activities
- Repair
- General procedures
- Mounting instructions for seals
- Screw joints
- Complete robot
- Replacement of Serial Measurement Board Unit
- Replacement of Parallel Arms
- Replacement of Upper Arm
- Replacement of Bearing Rings
- Replacement of Movable Plate
- Replacement of Telescopic Shaft
- Replacement of Universal Joint
- Replacement of Joint Balls
- Replacement of Gearbox Unit 1- 3
- Replacement of Gearbox Unit 4
- Replacement of motor axis 1-3
- Replacement of motor axis 4
- Replacement of labels
- Replacing of calibration marks
- Vacuum System
- Draining of water separation filter
- Replacement of Ejector Unit
- Cable Harness
- Replacement of Brake Release Button
- Calibration information
- Calibration methods
- Calibration movement directions for all axes
- Calibration scales and correct axis position
- Calibration IRB 360 axis 1-3
- Calibration IRB 360 axis 4
- Fine calibration procedure on FlexPendant
- Updating revolution counters
- Serial Measurement Board memory
- Checking the calibration position
- Decommissioning
- Environmental information
- Reference information
- Introduction
- Applicable safety standards
- Unit conversion
- Weight specifications
- Standard toolkit
- Special tools
- Lifting equipment and lifting instructions
- Oil and Grease specification
- Spare parts and exploded views
- Spare parts, Gear Unit axis 4
- Spare parts, transmission cover
- Spare parts - cable harness
- Spare Parts, SMB Unit
- Spare parts in the base
- Spare Parts, Brake Release Button
- Spare Parts Arm System
- Spare Parts, Telescopic shafts
- Spare parts - Parallell arm system, IRB 360
- Spare Parts, Movable Plate
- Spare Parts, Customer options
- Spare parts - customer options Signal lamp IRB 360
- Circuit diagram
|
Table of Contents33HAC030005-001 Revision: -© Copyright 2008 ABB. All rights reserved.Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Product documentation, M2004 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9How to read the product manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Safety 131.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131.2 General Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141.2.1 Safety in the robot system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141.2.2 Safety Risks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151.2.2.1 Safety risks during installation and service work on robot . . . . . . . . . . . . . . . . . . . . . . . . 151.2.2.2 Safety risks related to tools/workpieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171.2.2.3 Safety risks related to pneumatic/hydraulic systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181.2.2.4 Safety risks during operational disturbances. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191.2.2.5 Risks associated with live electric parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201.3 Safety related Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211.3.1 Safety signals, general . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211.3.2 DANGER - Moving robots are potentially lethal! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231.3.3 DANGER - First test run may cause injury or damage! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241.3.4 WARNING - The unit is sensitive to ESD! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251.3.5 WARNING - Safety risks during work with gearbox oil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272 Installation and Commissioning 292.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292.2 Structure Manipulator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302.3 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312.3.1 Weight specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312.3.2 Transport. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 322.3.3 Pre-installation procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332.3.4 Assemble the robot IRB360 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 362.3.5 Working range and type of motion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 382.4 On-site installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 402.4.1 Lifting robot with fork lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 402.4.2 Lifting robot with roundslings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 412.4.3 Amount of required space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 432.4.4 Orienting and securing the robot cage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 442.4.5 Orienting and securing the robot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 462.4.6 Manually releasing the brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 502.4.7 Fitting equipment on robot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 532.4.8 Loads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 582.5 Installation of Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 592.5.1 Installation of (Optional) Safety Lamp. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 592.5.2 Installation of (optional) customer connections IRB 360. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 612.5.3 Installation of Vacuum System (Optional). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 642.6 Electrical connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 672.6.1 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 672.6.2 Connecting the controller to the manipulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 682.6.3 Manipulator Cables IRB360. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 703 Maintenance 733.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 733.1.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 733.1.2 Regular Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
PreviousNext |