2-12t t t tInstalling Your NICThis chapter describes how to install and configure your AdaptecNIC in your computer. The following procedures are covered:n Installing the NIC on page 2-1n Connecting to Your Network Cable on page 2-2n Configuring the PCI NIC on page 2-3Installing the NICWARNING: Before you start, turn OFF power to the PC anddisconnect the power cord. Then ground yourself bytouching an unpainted surface of the PC case.1 Remove the cover from your computer, following themanufacturer’s instructions.2 Carefully lift the NIC out of its antistatic container. Determinethe model by looking at the model name on the NIC. Check theNIC for any visible signs of damage which may have occurredduring shipment.If you find a problem, immediately notify your networksupplier and the shipping service which delivered your NIC.3 Locate an unused PCI expansion slot. Unscrew the bracketscrew and remove the expansion slot bracket that covers thecard-slot opening.
