5-2Fast Ethernet Network Interface Cards6 To remove any currently installed Adaptec NIC drivers,highlight the driver, click Remove, then click OK. Repeat untilall Adaptec NIC drivers are removed.7 Click Close to close the Network dialog box.8 Click Yes to restart your computer.Note: When you restart Windows NT, a message mayindicate that at least one service failed to start. Thismessage will not appear after you add the new driversin the following steps. Click OK.Adding NIC Drivers1 Double-click the My Computer icon.2 Double-click the Control Panel icon.3 Double-click the Network icon.4 In the Network Setup dialog box select the Adapters tab.Note: Do not allow Network setup to autodetect thenetwork NIC.5 Click Add.6 Click Have Disk.7 At the prompt Insert disk with software provided by thesoftware or hardware manufacturer, insert Diskette 2. Enter thepath to the directory where the Windows NT driver andOEMSETUP file are located. Click OK.8 From the Select OEM Option dialog box select Adaptec PCIEthernet Adapter. Click OK.The driver configuration window is now displayed.
