9-6Fast Ethernet Network Interface CardsConfiguring Failover PairsThe following steps show how to group failover pairs. All availableports are listed in the Available Adaptec Ports list box.1 Assign a port to the Primary Ports list box by clicking on a portin the Available Adaptec Ports list box to highlight theselection.Note: The driver numbering schemes for the ports(EMPCI1, EMPCI2, etc.) shown in the Configurationscreen are not associated with the physical PCI slotnumbers on the motherboard.2 When a port has been highlighted, click on the top Add button.The port moves to the Primary Ports drop-down box.3 Assign a Backup port to the Primary Port by selecting a portfrom the Available Adaptec Ports list box and clicking on thebottom Add button. To remove a failover pair, select the port inthe Primary Ports drop-down box, and click Remove.4 When you have completed setup of all failover pairs, click OK.
