10-4Fast Ethernet Network Interface CardsConfiguring Ports1 Select the Configure Ports option from the Main Menu.The program automatically adds or removes ports when newhardware is added or removed. After removing a NIC, youmust reinstall and configure the driver for all ports. This isbecause the port index number relationship to the physicalport location will have changed.Note: The driver numbering schemes for the ports(EMPCI1, EMPCI2, etc.) are not associated with thephysical PCI slot numbers on the motherboard. It isrecommended that you check physical connectionsagainst the port information displayed on the screen.See Appendix C, Identifying Ports for moreinformation.2 To set the connection type, select each port individually andpress Enter.Main MenuConfigure PortsSet Failover PairsConfigure ProtocolsView ConfigurationInstall SoftwareUninstall Software1 Empci1 EnabledAutodetect (default)Autodetect (default) Enabled2 Empci2No. Port Name Connection Type Status
