10-10Fast Ethernet Network Interface CardsNote: To reconfigure the NICs, use the foconfig utilityinstalled during this process. The fosetup diskette can beput away. See Reconfiguring Using foconfig.nlm on page 10-12As the present driver uses 32 receive buffers for each port, you mayneed to increase the number of receive buffers. To do this, type loadedit c:\nwserver\startup.ncf and insert the following commands atthe end of the file:SET MINIMUM PACKET RECEIVE BUFFERS = 512SET MAXIMUM PACKET RECEIVE BUFFERS = 1024Viewing System Status Using fostatus.nlmType load fostatus at the server prompt to load the Failover statusmodule.Note: This module automatically appears on initial bootupafter the Failover software has been installed.Duralink Failover Status< F1> HelpNetware Loadable ModuleFailover Pairs/Ports to Exit.© Copyright 1998, Adaptec Inc.Pair1Empci6Empci9NIC Transmit Kbps Receive Kbps StatusEmpci5 ANA-6911A 10234 5020 ACTIVEEmpci8 ANA-6944A 0 0 DOWNEmpci10 ANA-6922 0 0 IDLEANA-6922 0 0 STANDBYANA-6944A 8305 5500 ACTIVEPair2Empci2Empci4ANA-6922 5798 1002 ACTIVEANA-6944A 0 STANDBY0 Refresh IntervalServer Name -->[NAME]
