5-15t t t tWindowsThis chapter describes how to install LAN drivers for Window NTand Windows 95. For additional information on installing LANdrivers for Windows’ environments refer to thereadme.txt file.If you are using an Alpha Server please refer to the NT for Alphareadme.txt file.Windows NT 4.0This section describes how to install LAN drivers for Windows NT.To install Duralink Failover drivers refer to Chapter 9, InstallingDuralink Drivers for Windows NT.The Windows NT 4.0 driver is in the \winnt\i386 directory.Note: These instructions are for Windows NT 4.0 only. Toinstall drivers for Windows 3.51, see thereadme.txt file.Removing Previously Configured DriversIf there are no previously installed Adaptec NICs go to Adding NICDrivers on page 5-2. Otherwise follow these steps:1 Boot your system with Windows NT 4.02 Double-click the My Computer icon.3 Double-click the Control Panel icon.4 Double-click the Network icon.5 Click the Adapters tab in the Network Setup dialog box.
