4-3NetWareConfiguring the Ports1 Select the new empci from the updated list of NICs.2 Type in a name for the newly added NIC.Note: When choosing a name for the NIC, you shouldinclude a reference to the index number assigned tothat NIC (See Step 3 below). This will help you identifythe NIC when configuring it. See Appendix C,Identifying Ports for tips on identifying NICs.3 Specify the index number in the next field (1 is the default forthe first board; set the next board at 2, and so forth).Note: Each port must be assigned a unique indexnumber.4 Specify the connection type. Autodetect Default isrecommended. For an explanation of options see ConnectionTypes on page A-2.5 Press Esc and save the configuration.6 For each additional port, press Ins at the Boards screen andrepeat Steps 1 - 5.
