Port Redirect Function Screen2E43-51/2E43-51R User’s Guide5-57Source Port [n] (Selectable)Allows a selected port [n] to be changed to a source port.Destination Port [n] (Selectable)Allows a selected port [n] to be changed to a destination port.Errors (Toggle)Allows the user to configure the source ports to either (ON) send erroredframes to selected destination ports, or (OFF) drop errored frames, andsend only valid traffic to the destination ports. The default setting of thisfield is ON. To set the Errors field, refer to Section 5.16.2Status (Toggle)Allows the addition or deletion of source and destination ports selected inthe Source port [n] and Destination port [n] fields.5.16.1 Displaying the Source and Destination EntriesThere can be more than one Port Redirect Function screen depending onthe number of port redirect entries. Each screen displays up to 10 portredirect entries. If there is more than one screen of redirect entries, theNEXT and/or PREVIOUS command displays at the bottom of the screen,allowing the user to navigate to either the next or previous screen.For example, with three screens of entries, the NEXT command displaysat the bottom of the first screen. In the second screen, the NEXT andPREVIOUS commands display. In the last screen, only the PREVIOUScommand displays.To display the next screen, use the arrow keys to highlight NEXT. PressENTER and the next screen of entries displays.To display the previous screen, use the arrow keys to highlightPREVIOUS. Press ENTER to view the entries in the previous screen.
