Chapter 5: Local Management5-362E43-51/2E43-51R User’s Guide5.10 SWITCH CONFIGURATION SCREENThe Switch Configuration screen, Figure 5-17, provides the basic setupoptions to make a switch operational in your network.To access the Switch Configuration screen from the Device ConfigurationMenu screen, use the arrow keys to highlight the SWITCHCONFIGURATION menu item and press ENTER. The SwitchConfiguration screen displays showing up to 7 ports, depending on ifthere are Fast Ethernet Interface Modules and an HSIM installed in thedevice.Figure 5-17 Switch Configuration ScreenNOTEThe Switch Configuration screen is not available if theoperational mode of the device is set to SECURE FAST VLAN.This screen may only be used when the device is configured tooperate as an 802.1D or 802.1Q switch.Firmware Revision: XX.XX.XXSwitch Configuration22511-18Device Name: 2E43-51BOOTPROM Revision: XX.XX.XXPort #1234567Statelearninglisteningstandbylearninglisteningstandbylistening2E43-51 LOCAL MANAGEMENTEvent Message LineRETURNSAVEMAC Address00-00-1D-00-00-0000-00-1D-00-00-0100-00-1D-00-00-0200-00-1D-00-00-0300-00-1D-00-00-0400-00-1D-00-00-0500-00-1D-00-00-06Status[ENABLED][DISABLED][ENABLED][DISABLED][ENABLED][DISABLED][ENABLED]Switch Address: 00-00-1D-00-00-00Number of Ports: 7Type of STA: [DEC]Age Time (sec): 300EXIT
