Network Tools2E43-51/2E43-51R User’s Guide5-855.26 NETWORK TOOLSThe Network Tools function allows the user to access and managenetwork devices. Figure 5-33 shows the Network Tools Help screen.To access the Network Tools screen, use the arrow keys to highlight theNETWORK TOOLS menu item in the Device Menu screen and pressENTER. The Network Tools screen displays.Figure 5-33 Network Tools ScreenThe Network Tools functions are performed using a series of commands.Entering commands in Network Tools involves typing the command to beexecuted at the Network Tools prompt, adding any desired or requiredextensions, and pressing ENTER.There are two categories of commands in the command set.• Built-in Commands – Allow the user to access and manage networkdevices. The commands are arp, bridge, defroute, netstat, ping,reset, show, traceroute, soft-reset, telnet, link_trap, andatm_stp_state.-> help090829arpnetstatshow traceroutedefrouteping resetbridgeSPECIAL:done, quit, or exit - Exit from the Network Tools.For help with a specific command, type 'help '.->Commands Available to UserBuilt in Commands:Welcome to Network Toolssoft_reset telnet link_trapatm_stp_state
