Chapter 5: Local Management5-82E43-51/2E43-51R User’s Guide5.4 ACCESSING LOCAL MANAGEMENTAccess to Local Management is controlled through the LocalManagement Password screen Figure 5-3. Whenever a connection ismade to the 2E43-51 the Local Management Password screen displays.Before continuing, the user must enter a password (community name)which is compared to the previously stored passwords. The level of accessallowed the user depends on the password. To set or change passwords,refer to Section 5.8. The following steps describe the procedure to accessLocal Management.1. Turn on the terminal. Press ENTER (up to four times) until the2E43-51 Local Management Password screen displays. It is theautomatic line speed seeking feature of the port that makes it necessaryat times to press ENTER several times.Figure 5-3 The 2E43-51 Local Management Password Screen2. Enter the Password and press ENTER. The default super-user accesspassword is “public” or press ENTER.2E43-51 LOCAL MANAGEMENTCABLETRON Systems, IncorporatedP.O.Box 5005Rochester, NH 03866-5005 USA(603) 332-9400(c) Copyright CABLETRON Systems, Inc, 1997Device Serial Number: XXXXXXXXXDevice Hardware Revision: XXDevice Firmware Revision: X.XX.XXDevice BOOTPROM Revision: X.XX.XXEnter Password:22511-12Event Message Line
