General Configuration Screen2E43-51/2E43-51R User’s Guide5-297. Use the SPACE bar or BACKSPACE to step through the availablesettings until the operation you require appears. Table 5-3 lists theavailable settings and their corresponding applications.8. Press ENTER to accept the application.9. Use the arrow keys to highlight the SAVE command at the bottom ofthe screen, then press the ENTER key.10. When the message “SAVED OK” displays, the edits are saved.5.7.11 Clearing NVRAMClearing NVRAM allows the user to clear all user-entered parameters,such as, the IP address and Community Names from NVRAM.Clear NVRAM as follows:1. Use the arrow keys to highlight the Clear NVRAM field.2. Use the SPACE bar to toggle the field to YES.3. Use the arrow keys to highlight SAVE at the bottom of the screen.4. Press ENTER. The warning screen shown in Figure 5-14 displays.Table 5-3 COM Port Application SettingsSetting Application[LM] Local Management Session[UPS] APC Power Supply SNMP Proxy!CAUTIONClearing NVRAM will result in the loss of all user-enteredparameters. Do not proceed unless this procedure iscompletely understood.
