Chapter 5: Local Management5-302E43-51/2E43-51R User’s GuideFigure 5-14 Clear NVRAM Warning Screen5. Select YES and the message “CLEARING NVRAM. REBOOT INPROGRESS...” displays.6. The 2E43-51 clears NVRAM and reboots. All user-entered parametersdefault to factory default settings.5.7.12 Enabling/Disabling IP FragmentationTo enable or disable IP Fragmentation, proceed as follows:1. Use the arrow keys to highlight the IP Fragmentation field.2. Press the SPACE bar to choose either ENABLED or DISABLED.3. Use the arrow keys to highlight the SAVE command.4. Press ENTER. The message “SAVED OK” displays at the top of thescreen.!CAUTIONIf the 2E43-51 is being bridged to an FDDI ring (for example,via an optional HSIM-F6), enable IP Fragmentation. If it isdisabled, all FDDI frames that exceed the maximum Ethernetframe size are discarded.WARNING174251YOU HAVE ELECTED TO CLEAR NVRAM. THIS WILL CLEARALL SYSTEM DEFAULTS INCLUDING BUT NOT LIMITED TOIP ADDRESS, INTERFACE CONFIGURATION, AND COM PORTCONFIGURATION, THEN RESET THE BOARD.ARE YOU SURE YOU WANT TO CLEAR NVRAM?YES NO
