General Configuration Screen2E43-51/2E43-51R User’s Guide5-175.7 GENERAL CONFIGURATION SCREENThe General Configuration screen, Figure 5-9, allows the user to set thesystem date and time, IP address and subnet mask, the Default Gateway,the TFTP Gateway IP address, and the operational mode. Also, clear theNVRAM, set the screen refresh time, the screen lockout time, the IPfragmentation, and the COM port configuration.To access the General Configuration screen from the DeviceConfiguration Menu screen, use the arrow keys to highlight theGENERAL CONFIGURATION menu item and press ENTER. TheGeneral Configuration screen displays.Figure 5-9 General Configuration ScreenThe following briefly explains each General Configuration screen field:MAC Address (Read-Only)Displays the physical address of the 2E43-51.Firmware Revision: XX.XX.XXGeneral Configuration2251-15Device Name: 2E43-51BOOTPROM Revision: XX.XX.XXMAC Address:IP Address:Subnet Mask:Default Gateway:TFTP Gateway IP Addr:Device Date:Device Time:Screen Refresh Time:Screen Lockout Time:Device Uptime: XX D XX H XX MCom: [ENABLED] Application: [LM]Clear NVRAM: [NO] IP Fragmentation [ENABLED ]Operational Mode: [Switching]2E43-51 LOCAL MANAGEMENTEvent Message LineRETURNSAVE00-00-ID-00-00-000.0.0.00.0.0.0NONE DEFINED0.0.0.001/11/199714:23:0003 sec.15 min.EXIT
