Chapter 5: Local Management5-442E43-51/2E43-51R User’s Guide5.13 HIGH SPEED INTERFACE CONFIGURATION MENUSCREENThe High Speed Interface Configuration Menu screen, Figure 5-20,applies to the Fast Ethernet Interface Modules and the High SpeedInterface Module.To access the High Speed Interface Configuration Menu screen from theDevice Specific Configuration Menu screen, use the arrow keys tohighlight the HIGH SPEED INTERFACE CONFIGURATION menuitem and press ENTER. The High Speed Interface Configuration Menuscreen displays.Figure 5-20 High Speed Interface Configuration Menu ScreenNOTEThis screen does not display unless one or two Fast EthernetInterface Modules and a High Speed Interface Module (HSIM)are installed.If only the Fast Ethernet Interface Module(s) or the HSIM isinstalled, then the respective Fast Ethernet Interfaces screen orthe HSIM Setup screen displays instead of the High SpeedInterface Configuration Menu screen.Firmware Revision: XX.XX.XXHigh Speed Interface Configuration MenuFAST ETHERNET INTERFACESHSIM22511-53Device Name: 2E43-51BOOTPROM Revision: XX.XX.XX2E43-51 LOCAL MANAGEMENTEvent Message LineRETURNSAVE EXIT
