Repeater Statistics Screen2E43-51/2E43-51R User’s Guide5-813. Press ENTER (neither the RMON Index # field nor the statistics willchange until ENTER is pressed).5.24.2 Using the Clear Counters CommandTo reset all the statistics counters of the selected interface to zero, performthe following steps:1. Use the arrow keys to highlight the CLEAR COUNTERS field.2. Press ENTER, the counters for the selected index are reset to zero.5.25 REPEATER STATISTICS SCREENOperating statistics for each repeater port (1 through 48) and itscorresponding network (ENETs 1 through 4) are displayed via theRepeater Statistics screen shown in Figure 5-32.To access the Repeater Statistics screen, use the arrow keys to highlightthe REPEATER STATISTICS menu item on the Device StatisticsMenu screen and press ENTER. The Repeater Statistics screen displays.Figure 5-32 Repeater Statistics Screen for Repeater Ports (1 – 48)Firmware Revision: XX.XX.XXRepeater Statistics22511-29Device Name: 2E43-51BOOTPROM Revision: XX.XX.XXRETURNCLEAR COUNTERS EXIT2E43-51 LOCAL MANAGEMENTEvent Message LinePORT #:nnBytes Received:Frames received:Total Errors:Collisions:OOW Collisions:CRC Errors:Alignment Errors:Undersize Packets:Oversize PacketsBroadcastsMulticasts:Link Status:Admin Status:Network #: xx75004566789000000000LinkEnabledPort #: xx75004566789000000000No LinkDisabled
