Device Specific Configuration Menu Screen2E43-51/2E43-51R User’s Guide5-393. Use the arrow keys to highlight the SAVE command at the bottom ofthe screen.4. Press ENTER. The message “SAVED OK” is displayed.5.10.3 Setting (Enabling or Disabling) the Port StatusTo set the status of an interface (port), proceed as follows:1. Use the arrow keys to highlight the Status field of the port.2. Use the SPACE bar to toggle to either ENABLED or DISABLED.3. Use the arrow keys to highlight the SAVE command at the bottom ofthe screen.4. Press ENTER. The message “SAVED OK” displays.5.11 DEVICE SPECIFIC CONFIGURATION MENUSCREENThe Device Specific Configuration Menu screen, Figure 5-18, allows theuser to select one of five screens to configure ports or check systemresources specific to the 2E43-51.NOTEThe PORT REDIRECT FUNCTION menu item on the DeviceSpecific Configuration Menu screen does not display if theoperational mode of the device is set to 802.1Q SWITCHING.The PORT REDIRECT FUNCTION and BROADCASTSUPPRESSION menu items do not display if the operationalmode is set to SECURE FAST VLAN.Section 5.7.9 provides instructions on setting the operationalmode.
