1-8 Keys, Doors and WindowsWith Remote Start Shown,Without SimilarQ (Lock): Press once to lock thedoors. The turn signal indicatorsflash. When Q is pressed twice, theturn signal indicators flash twice,and the horn sounds once toconfirm locking.To program the vehicle so the turnsignal indicators do not flash andthe horn does not sound whenpressing Q on the keyless accesstransmitter, see “Remote DoorLock Feedback” under VehiclePersonalization on page 4‑51.K (Unlock): Press once to unlockonly the driver door. The turn signalindicators flash twice.Press K twice within five secondsto unlock all the doors. The interiorlamps may come on.To program the vehicle so the turnsignal indicators do not flash andthe fog lamps and reverse lampsremain on steady for about20 seconds when the keylessaccess transmitter is used to unlockthe vehicle, see “Remote DoorUnlock Feedback” under VehiclePersonalization on page 4‑51.For vehicles with the memoryfeature, press K on the keylessaccess transmitter to program andrecall the memory settings. See“Memory Seat” under Power SeatAdjustment on page 2‑4 for moreinformation./ (Remote Start): Press tooperate the remote start feature.See Remote Vehicle Start onpage 1‑12 for additionalinformation.V / & (Remote Trunk/LiftgateRelease): Press and hold forabout one second to unlock thetrunk/liftgate. The automatictransmission must be in P (Park) orthe manual transmission must be inNeutral with the parking brake set.L (Vehicle Locator/PanicAlarm): Press and release tolocate the vehicle. The horn soundsthree times and the turn signallamps flash three times.Press and hold L forthree seconds to sound thepanic alarm. The horn soundsand the turn signal lamps flashfor 30 seconds. Press andrelease L again to stopthe alarm.