2-4 Seats and RestraintsPower Seat AdjustmentPower SeatsOn vehicles with power seats, thecontrols are located on the outboardside of the seats.. Move the seat forward orrearward by sliding thehorizontal control forward orrearward.. Raise or lower the front part ofthe seat cushion by moving thefront of the horizontal control upor down.. Raise or lower the rear part ofthe seat cushion by moving therear of the horizontal control upor down.. Raise or lower the entire seat bymoving the entire horizontalcontrol up or down.The vertical control is used forreclining the seatback. See “PowerReclining Seatbacks” underReclining Seatbacks on page 2‑7for more information.Memory Seat, Mirrors andSteering WheelOn vehicles with the memorypackage the controls are located onthe driver door. This feature is usedto program and recall memorysettings for the driver seat, outsidemirror, and the steering wheelposition if the vehicle has the powertilt wheel and telescopic steeringfeature.1: Saves the seating position fordriver 1.2: Saves the seating position fordriver 2.S : Recalls the easy exit position.To save your positions in memory:1. Adjust the driver seat, seatbackrecliner and lumbar, both outsidemirrors, and the steering wheelto a comfortable position.2. Press and hold button 1 until twobeeps sound through the driverside front speaker to let youknow that the position has beenstored.3. Repeat the procedure for asecond driver using button 2.To recall memory positions, thevehicle must be in P (Park) for anautomatic transmission or theparking brake applied for amanual transmission. Press andrelease either button 1 or button 2.