Cadillac 2010 CTS Owner's Manual

Also see for 2010 CTS: Owner's manual Brochure Brochure Owner's manual

4-58 Instruments and ControlsThe automatic easy exit seatmovement will only occur one timeafter the key is removed from theignition. If the automatic movementhas already occurred, and you putthe key back in the ignition andremove it again, the seat andsteering column will stay in theoriginal exit position, unless amemory recall took place prior toremoving the key again.Also, the driver's seat, outsidemirrors and steering wheel willautomatically move to the storeddriving position when the unlockbutton on the Remote Keyless Entry(RKE) transmitter is pressed. Thesteering column will also move onvehicles with the power tilt andtelescopic steering feature.No Change: No change will bemade to this feature. The currentsetting will remain.To select a setting, press the set/reset button while the desiredsetting is displayed on the DIC.Easy Exit SetupIf the vehicle has this feature, itallows you to select which areas willrecall with the automatic easy exitseat feature. The remote memoryrecall feature is unaffected by thisselection. It also allows you to turnoff the automatic easy exit feature.See the “Memory Seat” informationunder Power Seat Adjustment onpage 2‑4 and “Easy Exit Recall”earlier for more information.Press the customization button untilEasy Exit Setup appears on the DICdisplay. Press the set/reset buttononce to access the settings for thisfeature. Then press the menu up/down button to scroll through thefollowing settings:Off: No automatic seat exit willrecall.Tilt/Telescope: The steering wheeltilt and steering column telescopefeatures will recall.All (default): The driver's seat andthe steering wheel tilt and steeringcolumn telescope features willrecall, if the vehicle has this option.No Change: No change will bemade to this feature. The currentsetting will remain.To select a setting, press the set/reset button while the desiredsetting is displayed on the DIC.Exiting the FeatureSettings MenuThe feature settings menu will beexited when any of the followingoccurs:. The vehicle is no longer inON/RUN.. The trip/fuel or vehicleinformation DIC buttons arepressed.. The end of the feature settingsmenu is reached and exited.. A 40 second time period haselapsed with no selection made.