Seats and Restraints 2-5A single beep will sound. The seat,outside mirrors, and steering wheelwill move to the position previouslystored for the identified driver.If the Remote Keyless Entry (RKE)transmitter is used to enter thevehicle and the remote recallmemory feature is on, automaticseat and mirror movement occur.On vehicles with the KeylessAccess System, automaticadjustment occurs when thedriver door is opened.To stop recall movement of thememory feature at any time, pressone of the power seat controls,memory buttons, power tilt wheelcontrol, or power mirror buttons.If something has blocked the driverseat or the steering column whilerecalling a memory position, therecall may stop. Remove theobstruction, then press theappropriate control for the area thatis not recalling for two seconds.Try recalling the memory positionagain by pressing the appropriatememory button. If the memoryposition is still not recalling, seeyour dealer/retailer for service.Easy Exit RecallS : With the vehicle in P (Park) foran automatic transmission or theparking brake applied for a manualtransmission, press the exit buttonto recall the exit position.If the easy exit seat feature is onin the DIC, automatic seat andpower telescopic steering columnmovement occurs when the key isremoved from the ignition.On vehicles with the KeylessAccess System, automaticadjustment occurs when the ignitionis turned to OFF and the driver dooris opened.A single beep sounds. The driverseat moves back, and if the vehiclehas the power tilt wheel andtelescopic steering feature, it movesup and forward.See “EASY EXIT RECALL” underVehicle Personalization onpage 4‑51 for more information.For more programming information,see Vehicle Personalization onpage 4‑51.