Instruments and Controls 4-633. At the same time, press andhold both the Universal HomeRemote button to be used tocontrol the garage door and thehand-held transmitter button. Donot release the Universal HomeRemote button or the hand-heldtransmitter button until Step 4has been completed.Some entry gates and garagedoor openers may requiresubstitution of Step 3 with theprocedure noted in “GateOperator and CanadianProgramming” later in thissection.4. The indicator light on theUniversal Home Remote willflash slowly at first and thenrapidly after Universal HomeRemote successfully receivesthe frequency signal from thehand-held transmitter. Releaseboth buttons.5. Press and hold the newly-trainedUniversal Home Remote buttonand observe the indicator light.. If the indicator light stayson continuously, theprogramming is completeand the garage door shouldmove when the UniversalHome Remote button ispressed and released.There is no need tocontinue programmingSteps 6 through 8.. If the Universal HomeRemote indicator lightblinks rapidly fortwo seconds and thenturns to a constant light,continue with theprogramming Steps 6through 8.It may be helpful to haveanother person assist withthe remaining steps.Ofrecido por www.electromanuales.com
