Keys, Doors and Windows 1-25If the engine still does not start withthe other key, the vehicle needsservice. If the vehicle does start, thefirst key may be damaged. See yourdealer/retailer who can service thetheft-deterrent system and have anew key made.It is possible for the theft-deterrentsystem decoder to learn thetransponder value of a new orreplacement key. Up to 10 keys canbe programmed for the vehicle.The following procedure is forprogramming additional keys only.To program a new key do thefollowing:1. Verify that the new key has 1stamped on it.2. Insert the current driver's key inthe ignition and start the engine.If the engine will not start seeyour dealer/retailer for service.3. After the engine has started,turn the key to LOCK/OFF, andremove the key.4. Insert the key to be programmedand turn it to ON/RUN withinfive seconds of the ignition beingturned to LOCK/OFF in Step 3.5. The security light will turn offonce the key has beenprogrammed. It may not beapparent that the security lightwent on due to how quickly thekey is programmed.6. Repeat the Steps 1 through 4if additional keys are to beprogrammed.Do not leave the key or device thatdisarms or deactivates the theftdeterrent system in the vehicle.Immobilizer Operation(Keyless Access)This vehicle has a passivetheft-deterrent system.The system does not have to bemanually armed or disarmed.The vehicle is automaticallyimmobilized when the ignitioncontrol knob is turned to LOCK/OFF.The immobilization system isdisarmed when the ignition controlknob is pushed in and a validtransmitter is found in the vehicle.The security light, located in theinstrument panel cluster, comes onif there is a problem with arming ordisarming the theft-deterrentsystem.Ofrecido por www.electromanuales.com
