1-20 Keys, Doors and WindowsThe switch is located on the driver’sdoor. The vehicle must be inP (Park) to use the power feature.The taillamps flash when the powerliftgate moves.{ WARNINGYou or others could be injured ifcaught in the path of the powerliftgate. Make sure there is no onein the way of the liftgate as it isopening and closing.Notice: If you open the liftgatewithout checking for overheadobstructions such as a garagedoor, you could damage theliftgate or the liftgate glass.Always check to make sure thearea above and behind the liftgateis clear before opening it.The power liftgate has three modesof operation. Mode selection iscontrolled by the interior modeswitch located on the driver door.Choose the power liftgate mode byturning the dial on the switch untilthe indicator lines up with thedesired position.The three modes are:MAX: The liftgate power opens tothe full open height.3/4: The liftgate power opens to areduced open height that can be setby the vehicle operator in a range ofapproximately ¾ open to full open.Use this setting to prevent theliftgate from opening into overheadobstructions such as a garage dooror roof mounted cargo during poweroperation. The liftgate can still beopened fully manually.OFF: The liftgate only operatesmanually in this position.Manual operation of a liftgate thatalso has power operation requiresmore effort than with a standardmanual liftgate.In either the MAX or the ¾ mode,the liftgate can be power openedand closed by:. Press and hold the power liftgatebutton & on the RemoteKeyless Entry (RKE) transmitteruntil the liftgate starts moving.See Remote Keyless Entry(RKE) System Operation(Key Access) on page 1‑5 orRemote Keyless Entry (RKE)System Operation (KeylessAccess) on page 1‑7.Ofrecido por www.electromanuales.com
