Printing CAD DrawingsHP-GL/2 PrintingThis printer supports the original Canon GARO printer control language as well as HP-GL/2 and HPRTL(*1) emulation.(*2) When printing from applications that support HP-GL/2 output, specify HP-GL/2 inthe application’s plotter output settings.Note• For instructions on conguring these settings, refer to the software documentation.The printer automatically switches to the corresponding processing depending on whether a GARO,HP-GL/2, or HP RTL job is received. Congure the optional settings for HP-GL/2 emulation on the printercontrol panel. (→P.48)This printer can emulate the following printers using HP-GL/2 emulation.Emulated PrintersCanon W3000 and W3050(*3)Hewlett-Packard Designjet 450c, Designjet 750c Plus, and Designjet 750c*1: HP-GL/2: Hewlett-Packard Graphics Language 2; HP RTL: Hewlett-Packard Raster Transfer Language*2: It may not be possible to print jobs with excessively large amounts of data correctly.*3: Layout templates are not supported.166 Working With Various Print Jobs
