Network SettingConguring the Communication Mode ManuallyThis topic gives instructions for conguring the communication mode manually.1. Press the Menu button to display MAIN MENU.2. Press ▲ or ▼ to select Interface Setup, and then press ►.3. Press ▲ or ▼ to select Ethernet Driver, and then press ►.4. Press ▲ or ▼ to select Auto Detect, and then press ►.5. Press ▲ or ▼ to select Off, and then press OK.Return to the Ethernet Driver menu.6. Press ▲ or ▼ to select Comm.Mode, and then press ►.7. Press ▲ or ▼ to select the communication mode, and then press the OK button.Return to the Ethernet Driver menu.8. Press ▲ or ▼ to select Ethernet Type, and then press ►.9. Press ▲ or ▼ to select the Ethernet type, and then press OK.Return to the Ethernet Driver menu.10. Press ▲ or ▼ to select Spanning Tree, and then press ►.11. Press ▲ or ▼ to enable or disable spanning tree support, and then press OK.Return to the Ethernet Driver menu.12. Press the Online button.After the conrmation message is displayed, press OK.The printer will now restart.514 Network Setting