Problems Regarding PaperRoll paper cannot be inserted into the Paper Feed SlotCause Corrective ActionThe roll paper is warped. Straighten out curls and reload the roll.Cannot Load SheetsCause Corrective ActionThe paper source selection is incorrect. Press the Feeder Selection button to activate theCut Sheet lamp.Paper is not cut neatlyCause Corrective ActionThe paper is bent or curled at the cut position. Straighten out any curling by the edges of the paper.Paper rises by the ends of the cut position beforeit is cut.Reload the paper correctly.The Cutter Unit is installed incorrectly. Install the Cutter Unit correctly.(→P.577)The blade of the Cutter Unit is dull. Replace the Cutter Unit.(→P.577)Paper cannot be cutCause Corrective ActionIn the printer driver, No or Print Cut Guideline isspecied in Auto Cut.Specify Yes in Auto Cut in the printer driver.In MAIN MENU, Eject or Manual is specied inCutting Mode.Specify Automatic in Cutting Mode in MAIN MENU.The Cutter Unit is not installed. Install the Cutter Unit.(→P.577)606 Troubleshooting
