Messages regarding HP-GL/2Messages regarding HP-GL/2This type of paper is not compatible with HP-GL/2.Cause Corrective ActionReplace the paper with a type compatible withHP-GL/2. For details on paper compatible withHP-GL/2, refer to the Paper Reference Guide.(→P.95)The printer has received a HP-GL/2 print job thatcannot be printed on the paper that has beenadvanced.The printer may continue printing, but the printingquality may be affected. Check the printing results.There is no data.Cause Corrective ActionThe data was lost because of replotting. Data for replotting is lost after the followingoperations. In this case, send the print job again.• The memory buffer was cleared from the ControlPanel.• The printer was turned off.• The printer received a new print job.GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or0904)Cause Corrective ActionThe printer memory is full. Because the entire print job could not be received,the printer may not be able to print the entire original.Check the printing results.GL2: W0502 The parameter is out of range.Cause Corrective ActionA parameter specied in a HP-GL/2 command is outof the supported range.Check the print job.GL2: W0504 This command is not supported.Cause Corrective ActionThe printer has received an unsupported HP-GL/2command.Check the print job.644 Error Message
