Adjusting the PrintheadImportant• Do not touch the Linear Scale (a) or Carriage Shaft (b).6. Examine the test pattern for adjustment. Determine the straightest set of lines.Note• If no single set of lines is perfectly straight, choose the two sets of lines that are least misaligned.7. Open the Top Cover and move the Angle Adjustment Lever to match the number (or the square)of the straightest set of lines.If no single set of lines is perfectly straight, move the Angle Adjustment Lever to a positionbetween the numbers (or between the number and the square) of the two sets of lines thatare least misaligned.8. Close the Top Cover.The Printhead orientation is adjusted, and the printer goes online.Adjustments for Better Print Quality 547
