Network SettingConguring the IP Address Using imagePROGRAFDevice Setup UtilityFrom a computer running Windows, you can use imagePROGRAF Device Setup Utility provided with theprinter to congure the printer’s IP address. This topic describes how to congure the IP address usingimagePROGRAF Device Setup Utility.Important• To congure network settings, you must be logged in with administrative rights such as “Administrator”account. We recommend that your network administrator congure the network settings.• For instructions on installing imagePROGRAF Device Setup Utility, see “Installing imagePROGRAFDevice Setup Utility”. (→P.451)1. Start imagePROGRAF Device Setup Utility from the start menu.2. In the Product Name list displayed, select the printer to congure.3. Choose Protocol Settings from the Printer menu.4. In the Setting IP Address list, choose Manual.5. Enter the IP address assigned to the printer and click the Set button.6. Click OK after the Conrmation message dialog box is displayed.7. Exit imagePROGRAF Device Setup Utility.Note• To congure the IP address automatically, choose Auto in the Setting IP Address list and selectDHCP, BOOTP, or RARP.• You can also specify the subnet mask and default gateway.504 Network Setting
