Network SettingItem Details Default SettingRAW Mode Bi-direction Activate this setting to useRaw mode bidirectionalcommunication.OffFTP Printing Activate this setting to use FTPPrinting.OnSMTP Server Address Specify the SMTP server’s IPaddress.0.0.0.0Primary DNS Server Address Specify the IP address of theprimary DNS server.0.0.0.0SecondaryDNSServerAddress Specify the IP address of thesecondary DNS server.0.0.0.0DNS Host Name Specify the printer host name,up to 63 characters (1-63characters). Use single-byteletters, numbers, and “-”(hyphens). Do not use numbersor “-” for the rst character or “-”for the last character.NB-17FBxxxxxxxxxxxxDNS Domain Name Specify the printer domainname, up to 63 characters. Usesingle-byte letters, numbers, “-”(hyphens), and “.” (periods). Donot use numbers, “-”, or “.” for therst character, or “-” or “.” for thelast character.blankMulticast DNS Service Name Specify the printer’s MulticastDNS service name. (1-63characters)This name will be displayed whenBonjour functions are used.Canon iPFxxxx (xxxxxx)7. Click OK to display the Network page.Note• If you specify to congure the IP address using DHCP, BOOTP, or RARP, there must be a server thatsupports such protocol running in the network.• If you specify to congure the IP address using DHCP, BOOTP, or RARP, the IP address obtained by thismethod is used rst. If you cannot obtain the IP address, the address specied in IP Address is used.• It takes a minute or two to determine whether DHCP, BOOTP, or RARP are available. We recommendclearing check boxes of options you will not use.• If you are using a DNS server, select Enable DNS Dynamic Update and enter the IP Address for DNSservers, DNS host name, and DNS domain name in Primary DNS Server Address, Secondary DNSServer Address, DNS Host Name, and DNS Domain Name, respectively.Network Setting 509
