HP-GL/2 problemsHP-GL/2 problemsWith HP-GL/2, printing is misaligned.Cause Corrective ActionThe plotter origin is incorrect. Check the printing commands.Lines or images are missing in the HP-GL/2 data thatwas printed.Cause Corrective ActionThe memory is full. Check the size of the data in the print job.An HP-GL/2 command not supported by this printerwas received.Check the print job and settings.The printer has received print data that includes HPRTL commands when Auto Rotate is On.Set Auto Rotate to Off before attempting to printagain.(→P.48)Lines Are Printed Too Thick or Thin During HP-GL/2PrintingCause Corrective ActionThe Line Width setting in the main menu is incorrect. Conrm the selection in Line Width. If ne lines areprinted faint, setting ThickenFineLines to On in themain menu will print the lines more distinctly.(→P.48)HP-GL/2 jobs are printed in monochrome (or color).Cause Corrective ActionThe color mode is incorrect. On the printer Control Panel, check the color modesetting.(→P.48)For optimal printhead performance, the printer consumes trace amounts of color ink even in monochromemode.Printed Colors in Line Drawings are Inaccurate DuringHP-GL/2 PrintingCause Corrective ActionAdjustFaintLines in the main menu is set to On. Selecting Off may help produce the expected results.However, lines in some colors may appear broken.HP-GL/2 printing takes a long time.Cause Corrective ActionLarge print jobs with a lot of data take longer to print. On the printer Control Panel, set Input Resolution to300dpi.(→P.48)Troubleshooting 621
