Control PanelSetting Item Description, InstructionsCutting Mode Specify whether or not to cut with the standardround-bladed cutter.Choose Automatic to have the roll cut automatically afterprinting. If you choose Manual, the paper will not be cutafter printing. Instead, a line will be printed at the cutposition.Choose Eject if you prefer not to have documents droppedimmediately after printing, as when waiting for ink to dry.Bordless Margin Adjust the margin during borderless printing.Choose Automatic to have the printer automatically detectthe paper width and congure the margin settings forborderless printing. If margins are mistakenly createdwhen Automatic is selected, choose Fixed. In this case,the paper width is not detected automatically, and thedocument is printed without borders, using the marginsettings required by the printer.CutDustReduct. Choose On to reduce the amount of debris generatedwhen cutting lm and similar media by printing a line atthe cut position. This option reduces the amount of debrisgiven off after cutting. It also helps prevent adhesive fromsticking to the cutter and keeps the cutter sharp if you useadhesive paper. (→P.129)NearEnd Sht Mrgn Specify a margin at the leading edge of sheets to ensurebetter printing quality at the leading edge.Note that if you choose 3mm, it may lower the printingquality at the leading edge and affect feeding accuracy.The printed surface may be scratched, and ink may adhereto the leading edge.(The paper type isdisplayed here.)(*1)Return Defaults Choose Yes to restore Paper Details to the factory defaultvalues.*1: For information on the types of paper the printer supports, refer to the Paper Reference Guide.(→P.95)The paper type setting in the printer driver and related software (as well as on the ControlPanel ) is updated when you install the printer driver from the User Software CD-ROM or if you changepaper information by using the Media Conguration Tool.Printer Parts 51
