Printing banners or at other non-standard sizes10. Close the printer driver dialog box.Note• You can also specify a Custom Size as the paper size. Note that Custom Size settings are notavailable after you exit the application.For more information, see “Printing on Non-Standard Paper Sizes (Windows)”. (→P.306)Creating the banner in the applicationFollow the steps below to create the banner in Microsoft Word using the Custom Paper Size you registered.1. Start Microsoft Word.2. Choose Page Setup from the File menu to display the Page Setup dialog box.3. Under Paper Size, click the Custom Paper Size you registered-"My Horizontal Banner" in thisexample.Important• If "My Horizontal Banner" is not listed, make sure this printer is selected as the printer to use.• In applications such as Microsoft PowerPoint that do not enable you to choose registered papersizes, use the custom paper size setting in “Custom” and specify 100×500 mm (3.9×19.7 in)4. Set the printing orientation to horizontal.5. Create the banner.Printing the bannerFollow the steps below to print the banner using the corresponding banner settings.1. Choose Print in the Microsoft Word menu.2. Select the printer in the dialog box, and then open the printer driver dialog box. (→P.417)3. Make sure the Main sheet is displayed.4. In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.5. After conrming that D Easy Settings is selected, click Poster (Text, Illustrations) in theE Print Target list.Enhanced Printing Options 295