Adjusting the feed amount2. Press the Menu button to display MAIN MENU.3. Press ▲ or ▼ to select Adjust Printer, and then press the ► button.4. Press ▲ or ▼ to select Adjust Length, and then press the ► button.5. Press ▲ or ▼ to select Yes, and then press the OK button.A test pattern is printed for adjustment based on the amount of paper stretching or shrinkage.The scale bar shows “Millimeter” in 50 mm units and “Inch” in 1 inch units.6. Measure the length of the adjustment pattern. Calculate the difference between the measuredlength and actual length. Enter it as a percentage and press the OK button.You can adjust the value in 0.02 0ncrements. Press ▲ to increase the value and ▼ to decrease it.If the scale is printed shorter than actual size, set the value toward the positive side; if it is printedlonger, set the value toward the negative side.Note• You can also specify the adjustment value by selecting Paper Details → Adjust Length.556 Adjustments for Better Print Quality
