Canon CLC5100 Series Manual

Contents

Chapter 5᤹5-6424 M16 (cassette1 lifter motor) Rotates for lifterup operation for 3 sec, and thenstops. (Return the lifter by hand.)25 M17 (cassette2 lifter motor) Rotates for lifterup operation for 3 sec, and thenstops. (Return the lifter by hand.)26 M1 (multifeeder lifter motor) Rotates for lifterup operation for 3 sec, stops for 3 sec,rotates for lifterdown operation for 3 sec, and thenstops.27 M2 (paper deck lifter motor) Rotates for lifterdown operation for 10 sec, rotates forlifterup operation for 10 sec, and then stops.28 Registration shutter motor Executes a single registration shutter open/closeoperation.29 Y/C/Bk image correction mirrorRatio correction motor (M3, M6,M8)Operates the image correction mirror, and generates atest pattern (PG=06, grid); then, returns the mirror tooriginal position. (Each motor may be assumed to beoperating normally if a discrepancy exists between theM grid and the grid of each color.)Pickup will be from the cassette 1; be sure to put A4/LTR paper in the cassette in advance.30 Y/C/Bk image correction mirrorSlant correction motor (M2, M5,M7)31 M38(cassette1 pickup motor) The motor operates for 10 sec, stops for 3 sec, and thenoperates for a further 10 sec before it stops.32 M39(cassette2 pickup motor) The motor operates for 10 sec, stops for 3 sec, and thenoperates for a further 10 sec before it stops.33 M37(repickup motor) The motor operates for 10 sec, stops for 3 sec, and thenoperates for a further 10 sec before it stops.34 M1(paper deck pickup motor) The motor operates for 10 sec, stops for 3 sec, and thenoperates for a further 10 sec before it stops.35 M35(registration motor) The motor operates for 10 sec, stops for 3 sec, and thenoperates for a further 10 sec before it stops.36 M2(buffer unit reversal motor) The motor operates for 10 sec, stops for 3 sec, and thenoperates for a further 10 sec before it stops.37 Transfer belt cleaning webmotor(M12)The motor operates for 10 sec, stops for 3 sec, and thenoperates for a further 10 sec before it stops.38 Paper deck swing motor (M3) The machine drives the swing motor for 20 sec to fanout the sheets of paper, and then stops it; as the samedrive signal is used, the paper fanning fan also goes on.Details of MTRNo. Motor Control