Danfoss VLT FC 102 Programming Manual

Also see for VLT HVAC Drive FC 102: Operating instructions Service guide Programming guide Installation guide Installation guide

Contents

0-30 Custom Readout UnitOption: Function:[22] l/h[23] m³/s[24] m³/min[25] m³/h[30] kg/s[31] kg/min[32] kg/h[33] t/min[34] t/h[40] m/s[41] m/min[45] m[60] °C[70] mbar[71] bar[72] Pa[73] kPa[74] m WG[75] mm Hg[80] kW[120] GPM[121] gal/s[122] gal/min[123] gal/h[124] CFM[125] ft³/s[126] ft³/min[127] ft³/h[130] lb/s[131] lb/min[132] lb/h[140] ft/s[141] ft/min[145] ft[160] °F[170] psi[171] lb/in²[172] in WG[173] ft WG[174] in Hg[180] HP0-31 Custom Readout Min ValueRange: Function:Sizerelated*[ -999999.99 -100.00CustomRea-doutUnit]This parameter allows selection ofthe minimum value of the custom-defined readout (occurs at 0 speed).It is only possible to select a valuedifferent from 0 when selecting alinear unit in parameter 0-30 CustomReadout Unit. For quadratic and0-31 Custom Readout Min ValueRange: Function:cubic units, the minimum value is0.0-32 Custom Readout Max ValueRange: Function:100Custom-ReadoutUnit*[ par. 0-31 -999999.99CustomRea-doutUnit]This parameter sets the maximumvalue to be shown when the speedof the motor has reached the setvalue for parameter 4-13 MotorSpeed High Limit [RPM] orparameter 4-14 Motor Speed HighLimit [Hz] (depends on setting inparameter 0-02 Motor Speed Unit).0-37 Display Text 1Range: Function:0* [0 - 25 ] In this parameter, it is possible towrite an individual text string to beshown in the LCP or to be read viaserial communication.To show the text permanently,select [37] Display Text 1 in 1 of thefollowing parameters:• Parameter 0-20 Display Line1.1 Small.• Parameter 0-21 Display Line1.2 Small.• Parameter 0-22 Display Line1.3 Small.• Parameter 0-23 Display Line2 Large.• Parameter 0-24 Display Line3 Large.• Parameter 0-37 Display Text1.Changing parameter 12-08 HostName changesparameter 0-37 Display Text 1 - butnot the opposite way.Parameter Descriptions Programming GuideM0010001 Danfoss A/S © 10/2019 All rights reserved. 433 3