Danfoss VLT FC 102 Programming Manual

Also see for VLT HVAC Drive FC 102: Operating instructions Service guide Programming guide Installation guide Installation guide

Contents

[35] ExternalInterlockThe external interlock function has beenactivated via one of the digital inputs.[40] Out of refrange[41] Belowreference low[42] Abovereference high[45] Bus Ctrl[46] Bus Ctrl 1 iftimeout[47] Bus Ctrl 0 iftimeout[60] Comparator 0 See parameter group 13-1* Comparators. Ifcomparator 0 is evaluated as TRUE, theoutput goes high. Otherwise, it is low.[61] Comparator 1 See parameter group 13-1* Comparators. Ifcomparator 2 is evaluated as TRUE, theoutput goes high. Otherwise, it is low.[62] Comparator 2 See parameter group 13-1* Comparators. Ifcomparator 2 is evaluated as TRUE, theoutput goes high. Otherwise, it is low.[63] Comparator 3 See parameter group 13-1* Comparators. Ifcomparator 3 is evaluated as TRUE, theoutput goes high. Otherwise, it is low.[64] Comparator 4 See parameter group 13-1* Comparators. Ifcomparator 4 is evaluated as TRUE, theoutput goes high. Otherwise, it is low.[65] Comparator 5 See parameter group 13-1* Comparators. Ifcomparator 5 is evaluated as TRUE, theoutput goes high. Otherwise, it is low.[70] Logic Rule 0 See parameter group 13-4* Logic Rules. Iflogic rule 0 is evaluated as TRUE, theoutput goes high. Otherwise, it is low.[71] Logic Rule 1 See parameter group 13-4* Logic Rules. Iflogic rule 1 is evaluated as TRUE, theoutput goes high. Otherwise, it is low.[72] Logic Rule 2 See parameter group 13-4* Logic Rules. iflogic rule 2 is evaluated as TRUE, theoutput goes high. Otherwise, it is low.[73] Logic Rule 3 See parameter group 13-4* Logic Rules. Iflogic rule 3 is evaluated as TRUE, theoutput goes high. Otherwise, it is low.[74] Logic Rule 4 See parameter group 13-4* Logic Rules. Iflogic rule 4 is evaluated as TRUE, theoutput goes high. Otherwise, it is low.[75] Logic Rule 5 See parameter group 13-4* Logic Rules. iflogic rule 5 is evaluated as TRUE, theoutput goes high. Otherwise, it is low.[80] SL DigitalOutput ASee parameter 13-52 SL Controller Action.The input will go high whenever thesmart logic action [38] Set dig. out. A highis executed. The input goes low wheneverthe smart logic action [32] Set dig. out. Alow is executed.[81] SL DigitalOutput BSee parameter 13-52 SL Controller Action.The input goes high whenever the smartlogic action [39] Set dig. out. Bhigh isexecuted. The input goes low wheneverthe smart logic action [33] Set dig. out. Blow is executed.[82] SL DigitalOutput CSee parameter 13-52 SL Controller Action.The input goes high whenever the smartlogic action [40] Set dig. out. C high isexecuted. The input goes low wheneverthe smart logic action [34] Set dig. out. Clow is executed.[83] SL DigitalOutput DSee parameter 13-52 SL Controller Action.The input goes high whenever the smartlogic action [41] Set dig. out. D high isexecuted. The input goes low wheneverthe smart logic action [35] Set dig. out. Dlow is executed.[84] SL DigitalOutput ESee parameter 13-52 SL Controller Action.The input goes high whenever the smartlogic action [42] Set dig. out. E high isexecuted. The input goes low wheneverthe smart logic action [36] Set dig. out. Elow is executed.[85] SL DigitalOutput FSee parameter 13-52 SL Controller Action.The input goes high whenever the smartlogic action [43] Set dig. out. F high isexecuted. The input goes low wheneverthe smart logic action [37] Set dig. out. Flow is executed.[160] No alarm The output is high when no alarm ispresent.[161] RunningreverseThe output is high when the frequencyconverter is running counter clockwise(the logical product of the status bitsrunning AND reverse).[165] LocalreferenceactiveThe output is high whenparameter 3-13 Reference Site=[2] Local orwhen parameter 3-13 Reference Site=[0]Linked to hand auto at the same time asthe LCP is in Hand mode.[166] RemotereferenceactiveThe output is high whenparameter 3-13 Reference Site = [1] Remoteor [0] Linked to hand/auto while the LCP isin Auto onmode.[167] StartcommandactiveThe output is high when there is an activestart command (that is via digital input,bus connection, [Hand on] or [Auto on]),and no stop command is active.[168] Drive in handmodeThe output is high when the frequencyconverter is in Hand mode (as indicatedby the LED light above [Hand On].[169] Drive in automodeThe output is high when the frequencyconverter is in Hand mode (as indicatedby the LED light above [Auto on].Parameter Descriptions Programming GuideM0010001 Danfoss A/S © 10/2019 All rights reserved. 973 3