Menu item DescriptionRecycledPaperCard StockTransparencyLabelsEnvelopeSpecifies a paper type when the Recycled setting is selected in other menusNotes:• Paper is the factory default setting.• The custom media type must be supported by the selected tray ormultipurpose feeder in order to print from that source.• Single-sided paper labels designed for laser printers are supported foroccasional use: no more than 20 pages a month. Vinyl, pharmacy, anddual-web labels are not supported.Universal Setup menuThese menu items are used to specify the height, width, and feed direction of the Universal Paper Size. The UniversalPaper Size is a user-defined paper size setting. It is listed with the other paper size settings and includes similar options,such as support for duplex printing and printing multiple pages on one sheet.Menu item DescriptionUnits of MeasureInchesMillimetersIdentifies the units of measureNotes:• Inches is the US factory default setting.• Millimeters is the international factory default setting.Portrait Width3–14 inches76–360 mmSets the portrait widthNotes:• If the width exceeds the maximum, the printer uses the maximumwidth allowed.• 8.5 inches is the US factory default setting. Inches can be increasedin 0.01-inch increments.• 216 mm is the international factory default setting. Millimeters canbe increased in 1-mm increments.Portrait Height3–14 inches76–360 mmSets the portrait heightNotes:• If the height exceeds the maximum, the printer uses the maximumheight allowed.• 14 inches is the US factory default setting. Inches can be increased in0.01-inch increments.• 356 mm is the international factory default setting. Millimeters canbe increased in 1-mm increments.Feed DirectionShort EdgeLong EdgeSpecifies the feed direction if the paper can be loaded in either directionNotes:• Short Edge is the factory default setting.• Long Edge appears only if the longest edge is shorter than themaximum width supported in the tray.Understanding printer menus103
