Enabling MenusWait for the message to clear.Encrypting disk x/y XX% DO NOT POWER OFFWait for the message to clear.Warning—Potential Damage: Do not power off while the printer is encrypting the printer hard disk.The percentage completed appears on the display.Enter PINEnter the PIN you created in Print Properties when the confidential job was sent for printing.Error reading USB driveRemove the device and wait for the message to clear. The USB drive may be corrupted.Flushing bufferWait for the message to clear.Formatting Disk x/y XX% DO NOT POWER OFFWait for the message to clear.Warning—Potential Damage: Do not power off while the printer is formatting the printer hard disk.The percentage completed appears on the display.Formatting Flash DO NOT POWER OFFWait for the message to clear.Warning—Potential Damage: Do not power off while the printer is formatting the flash memory.Hex Trace ReadyThe printer is in the Ready state, and Hex Trace is active. You can use Hex Trace to troubleshoot printer problems.Insert staple cartridgeTry one or more of the following:• Insert a staple cartridge to clear the message.• Press to clear the message and print without using the staple feature.Understanding printer messages145
