Menu item DescriptionDevice-Initiated E-mailNoneUse Device SMTP CredentialsDevice UseridDevice PasswordKerberos 5 RealmNTLM DomainSpecifies what credentials will be used when communicating to theSMTP server. Some SMTP servers require credentials in order to send e-mail.Notes:• None is the factory default setting for Device-Initiated E-mail.• Device Userid and Device Password are used to log in to the SMTPserver when "Use Device SMTP Credentials" is selected.Security menuMiscellaneous menuMenu item DescriptionPanel LoginsLogin failuresFailure time frameLockout timeLogin timeoutLimits the number and time frames of failed login attempts from the printer controlpanel before all users are locked outNotes:• “Login failures” specifies the number of failed login attempts before users arelocked out. Settings range from 1–50. 3 attempts is the factory default setting.• “Failure time frame” specifies the time frame during which failed login attemptscan be made before users are locked out. Settings range from 1–60 minutes. 5minutes is the factory default setting.• “Lockout time” specifies how long users are locked out after exceeding thelogin failures limit. Settings range from 0–60 minutes. 5 minutes is the factorydefault setting. 0 indicates the printer does not impose a lockout time.• “Login timeout” specifies how long the printer remains idle on the Home screenbefore automatically logging the user off. Settings range from 1–900 seconds.300 seconds is the factory default setting.Remote LoginsLogin failuresFailure time frameLockout timeLogin timeoutLimits the number and time frames of failed login attempts from a computer beforeall remote users are locked outNotes:• “Login failures” specifies the number of failed login attempts before users arelocked out. Settings range from 1–50. 3 attempts is the factory default setting.• “Failure time frame” specifies the time frame during which failed login attemptscan be made before users are locked out. Settings range from 1–60 minutes. 5minutes is the factory default setting.• “Lockout time” specifies how long a user is locked out after exceeding the loginfailures limit. Settings range from 0–60 minutes. 5 minutes is the factory defaultsetting. 0 indicates the printer does not impose a lockout time.• “Login timeout” specifies how long the remote interface remains idle beforeautomatically logging the user off. Settings range from 1–900 seconds. 300seconds is the factory default setting.Understanding printer menus119
