Menu item DescriptionPrint AreaNormalWhole PageSets the logical and physical printable areaNotes:• This menu does not appear if Edge to Edge is enabled in theprinter Setup menu.• Normal is the factory default setting. When attempting toprint data in the non-printable area defined by the Normalsetting, the printer clips the image at the boundary.• The Whole Page setting allows the image to be moved intothe non-printable area defined by the Normal setting, but theprinter will clip the image at the Normal setting boundary.• The Whole Page setting only affects pages printed using aPCL 5e interpreter. This setting has no effect on pages printedusing the PCL XL or PostScript interpreter.Download TargetRAMFlashDiskSets the storage location for downloadsNotes:• RAM is the factory default setting.• Storing downloads in flash memory or on a printer hard diskplaces them in permanent storage. Downloads remain inflash memory or on the printer hard disk even when theprinter is turned off.• Storing downloads in RAM is temporary.• This menu appears only if a flash and/or disk option isinstalled.Job AccountingOnOffSpecifies whether the printer stores statistical information aboutthe most recent print jobs on the hard diskNotes:• Off is the factory default setting. Off means the printer doesnot store job statistics.• The statistics include a record of print errors, the print time,the job size in bytes, the requested paper size and type, thetotal number of printed pages, and the total number of copiesrequested.• Job Accounting is available only when a printer hard disk isinstalled and working properly. It should not be Read/Writeor Write protected. Job Buffer Size should not be set to 100%.• Changing this setting from the printer control panel and thenexiting the menus causes the printer to reset. The menuselection is updated.Understanding printer menus128
