Printing information pagesPrinting a font sample listTo print samples of the fonts currently available for your printer:1 Make sure the printer is on and Ready appears.2 From the printer control panel, press .3 Press the arrow buttons until Reports appears, and then press .4 Press the arrow buttons until Print Fonts appears, and then press .5 Press the arrow buttons until appears next to PCL Fonts, PostScript Fonts, or PPDS Fonts, andthen press .Printing a directory listA directory list shows the resources stored in flash memory or on the hard disk.1 Make sure the printer is on and Ready appears.2 From the printer control panel, press .3 Press the arrow buttons until Reports appears, and then press .4 Press the arrow buttons until Print Directory appears, and then press .Printing the print quality test pagesPrint the print quality test pages to isolate print quality problems.1 Turn the printer off.2 Hold down and while turning the printer on.3 Release the buttons when the clock appears, and wait for CONFIG MENU to appear.4 Press the arrow buttons until Prt Quality Pgs appears, and then press .The print quality test pages print.5 Press the arrow buttons until Exit Config Menu appears, and then press .Resetting the Printer appears briefly, followed by a clock, and then Ready appears.Printing76
