Menu item DescriptionCollateOff (1,1,1,2,2,2)On (1,2,1,2,1,2)Stacks the pages of a print job in sequence when printing multiple copiesNotes:• Off is the factory default setting. No pages will be collated.• The On setting stacks the print job sequentially.• Both settings print the entire job the number of times specified by the Copiesmenu setting.Separator SheetsNoneBetween CopiesBetween JobsBetween PagesSpecifies whether blank separator sheets are insertedNotes:• None is the factory default setting.• Between Copies inserts a blank sheet between each copy of a print job ifCollation is set to On. If Collation is set to Off, a blank page is inserted betweeneach set of printed pages, such as after all page 1's and after all page 2's.• Between Jobs inserts a blank sheet between print jobs.• Between Pages inserts a blank sheet between each page of the print job. Thissetting is useful when printing transparencies or inserting blank pages in adocument for notes.Separator SourceTray Multi-Purpose FeederEnvelope FeederSpecifies the paper source for separator sheetsNotes:• Tray 1 (standard tray) is the factory default setting.• From the Paper menu, Configure MP must be set to Cassette in order forMulti-Purpose Feeder to appear as a menu setting.N-up (pages-side)Off2-Up3-Up4-Up6-Up9-Up12-Up16-UpSpecifies that multiple-page images be printed on one side of a sheet of paperNotes:• Off is the factory default setting.• The number selected is the number of page images that will print per side.N-up OrderingHorizontalReverse HorizontalReverse VerticalVerticalSpecifies the positioning of multiple-page images when using N-up (pages-sides)Notes:• Horizontal is the factory default setting.• Positioning depends on the number of images and whether the images are inportrait or landscape orientation.OrientationAutoLandscapePortraitSpecifies the orientation of a multiple-page sheetNote: Auto is the factory default setting. The printer chooses between portrait andlandscape.Understanding printer menus130
