Tips on using labelsPrint samples on the labels being considered for use before buying large quantities.Note: Single-sided paper labels designed for laser printers are supported for occasional use: no more than 20 pagesof labels a month. Vinyl, pharmacy, and dual-web labels are not supported.When printing on labels:• Feed labels from a 250-sheet tray, a 550-sheet tray, or the multipurpose feeder.• Use labels designed specifically for laser printers. Check with the manufacturer or vendor to verify that:– The labels can withstand temperatures up to 230°C (446°F) without sealing, excessive curling, wrinkling, orreleasing hazardous emissions.– Label adhesives, face sheet (printable stock), and topcoats can withstand up to 25 psi (172 kPa) pressurewithout delaminating, oozing around the edges, or releasing hazardous fumes.• Do not use labels with slick backing material.• Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a jam. Partial sheetsalso contaminate the printer and the cartridge with adhesive, and could void the printer and cartridge warranties.• Do not use labels with exposed adhesive.• Do not print within 1 mm (0.04 in.) of the edge of the label, of the perforations, or between die-cuts of the label.• Be sure adhesive backing does not reach to the sheet edge. Zone coating of the adhesive at least 1 mm (0.04 in.)away from edges is recommended. Adhesive material contaminates the printer and could void the warranty.• If zone coating of the adhesive is not possible, remove a 1.6-mm (0.06-in.) strip on the leading and driver edge,and use a non-oozing adhesive.• Portrait orientation works best, especially when printing bar codes.Tips on using card stockCard stock is heavy, single-ply specialty media. Many of its variable characteristics, such as moisture content, thickness,and texture, can significantly impact print quality. Print samples on the card stock being considered for use beforebuying large quantities.When printing on card stock:• Feed card stock from a 250-sheet tray, a 550-sheet tray, or the multipurpose feeder.• Make sure the Paper Type is Card Stock.• Select the appropriate Paper Texture setting.• Be aware that preprinting, perforation, and creasing may significantly affect the print quality and cause jams orother paper handling problems.• Check with the manufacturer or vendor to ensure the card stock can withstand temperatures up to 230°C (446°F)without releasing hazardous emissions.• Do not use preprinted card stock manufactured with chemicals that may contaminate the printer. Preprintingintroduces semi-liquid and volatile components into the printer.• Use grain short card stock when possible.Printing72
