4 not present5 not present6 not presentThe find keyword displays the output of the show command beginning from the first occurrence ofspecified text. The following example shows this command used in combination with the showlinecard all command.Example of the find KeywordThe display command displays additional configuration information.The no-more command displays the output all at once rather than one screen at a time. This is similar tothe terminal length command except that the no-more option affects the output of the specifiedcommand only.The save command copies the output to a file for future reference.NOTE: You can filter a single command output multiple times. The save option must be the lastoption entered. For example: Dell# command | grep regular-expression | exceptregular-expression | grep other-regular-expression | find regular-expression| save.Multiple Users in Configuration ModeDell Networking OS notifies all users when there are multiple users logged in to CONFIGURATION mode.A warning message indicates the username, type of connection (console or VTY), and in the case of a VTYconnection, the IP address of the terminal on which the connection was established. For example:• On the system that telnets into the switch, this message appears:% Warning: The following users are currently configuring the system:User "" on line console0• On the system that is connected over the console, this message appears:% Warning: User "" on line vty0 "10.11.130.2" is in configurationmodeIf either of these messages appears, Dell Networking recommends coordinating with the users listed inthe message so that you do not unintentionally overwrite each other’s configuration changes.44 Configuration Fundamentals
