Configuring Contact and Location Information usingSNMPYou may configure system contact and location information from the Dell Networking system or fromthe management station using SNMP.To configure system contact and location information from the Dell Networking system and from themanagement station using SNMP, use the following commands.• (From a Dell Networking system) Identify the system manager along with this person’s contactinformation (for example, an email address or phone number).CONFIGURATION modesnmp-server contact textYou may use up to 55 characters.The default is None.• (From a Dell Networking system) Identify the physical location of the system (for example, San Jose,350 Holger Way, 1st floor lab, rack A1-1).CONFIGURATION modesnmp-server location textYou may use up to 55 characters.The default is None.• (From a management station) Identify the system manager along with this person’s contactinformation (for example, an email address or phone number).CONFIGURATION modesnmpset -v version -c community agent-ip sysContact.0 s “contact-info”You may use up to 55 characters.The default is None.• (From a management station) Identify the physical location of the system (for example, San Jose, 350Holger Way, 1st floor lab, rack A1-1).CONFIGURATION modesnmpset -v version -c community agent-ip sysLocation.0 s “location-info”You may use up to 55 characters.The default is None.844 Simple Network Management Protocol (SNMP)
