47Storm ControlStorm control allows you to control unknown-unicast, muticast, and broadcast traffic on Layer 2 andLayer 3 physical interfaces.Dell Networking Operating System (OS) Behavior: Dell Networking OS supports unknown-unicast,muticast, and broadcast control (the storm-control broadcast command) for Layer 2 and Layer 3traffic.To view the storm control broadcast configuration show storm-control broadcast | multicast| unknown-unicast | pfc-llfc[interface] command.EXEC PrivilegeTo view the storm control multicast configuration, use the show storm-control broadcast |multicast | unknown-unicast | pfc-llfc [interface] command.EXEC PrivilegeExample:Dell#show storm-control multicast Tengigabitethernet 1/1Multicast storm control configurationInterface Direction Packets/Second-----------------------------------------Te 1/1 Ingress 5Dell#To display the storm control unknown-unicast configuration, use the show storm-control unknown-unicast [interface] command.EXEC PrivilegeConfigure Storm ControlStorm control is supported in INTERFACE mode and CONFIGURATION mode.Configuring Storm Control from INTERFACE ModeTo configure storm control, use the following command.From INTERFACE mode:• You can only configure storm control for ingress traffic.• If you configure storm control from both INTERFACE and CONFIGURATION mode, the INTERFACEmode configurations override the CONFIGURATION mode configurations.Storm Control 865
