Denon DVD-2910 Operating Instructions Manual

Also see for DVD-2910: Operating instructions Specifications Supplementary guide Service manual Operating instructions

11ENGLISH5 PART NAMES AND FUNCTIONS(1) Front PanelSee page 3.q Power ON/STANDBY button• Press once to set to the standby mode. Theindicator lights up in red.• Press again to turn the power on. Theindicator lights up in green.w Power indicator• This indicator lights when the power is on andwhen the power is in the standby mode.Light green:Power is onLight red :Power is in the standby modee Power switch• Press once to turn the power on.• Press again to set to the “OFF” position andturn the power off.r Display• Information on the disc that is currently playingis shown on the display. (See page 12.)t Remote control sensory Select the playback area/layer ofSUPER AUDIO CD(SUPER AUDIO CD SETUP)• Switch the area /layer of the Super audio CDSplayed with priory.• MULTI.......When playing Super audio CDs, theMulti channel area is played withpriory.• STEREO ....When playing Super audio CDs,the stereo channel area is playedwith priority.• CD.............When playing Super audio CDs,the CDs layer area is played withpriority.u PURE DIRECT SELECT button• Press to switch the modes with the specificvideo signals and digital audio signals andindicate in display on and off. (See pages 24.)NORMAL MODE 1 MODE 2 ALL OFFMULTI STEREO CDi SELECT of HDMI/DVI button• Press this to set the video signal output fromthe HDMI connector or the DVI connector.(See page 26.)o FORMAT of HDMI/DVI button• Press this to set the video signal format fromthe HDMI connector or the DVI connector.(See page 26.)!0 Disc tray• Load discs here. (See pages 13, 27.)• Press the OPEN/CLOSE button !1 to openand close the disc tray.• The disc tray is also closed when the PLAYbutton !3 is pressed.!1 OPEN/CLOSE button (5)• Press this to open and close the disc tray.(See pages 13, 27.)!2 STILL/PAUSE button (3)• Press this to pause images or music or to playimages frame by frame. (See page 28.)!3 PLAY button (1)• Press this to play the disc. (See page 27.)!4 STOP button (2)• Press this to stop the disc. (See page 28.)!5 Skip button (8)• Press this to move back to the beginning ofthe current track (or chapter).• Press again to move back to the beginning tothe previous track (or chapter). (See page 28.)!6 Skip button (9)• Press this to move ahead to the beginning ofthe next track (or chapter). (See page 28.)!7 Slow/Search buttons (6 7)• Press this to set the slow play or search mode.(See page 28.)6: search in the reverse direction.7: search in the forward direction.480P/576P 720P 1080iHDMI Y Cb Cr HDMI RGBHDMI/DVI OFFDVI(2) Rear Panel!8 Audio output connectors(5.1ch AUDIO OUT)• Connect using the audio cord (available instores).!9 Audio output connectors(2ch AUDIO OUT)• Connect using the included audio cord.• Multi-channel sound is down-mixed andoutput.@0 Digital audio output connector(OPTICAL)• Connect using an optical fiber cable (availablein stores).• Digital data is output from this connector.@1 Digital audio output connector(COAXIAL)• Connect using an digital audio cord. Connect acommercially available 75 Ω/ohms pin-plugcord.• Digital data is output from this connector.@2 Control output connector(ROOM TO ROOM/OUT)• This is the output connector for wired remotecontrol.Consult your DENON dealer if you wish to usethis connector.@3 Control input connector(ROOM TO ROOM/IN)• This is the input connector for wired remotecontrol.Consult your DENON dealer if you wish to usethis connector.@4 HDMI output connector• Connect using HDMI connection cord(available in stores).@5 DVI-D-Video output connector(DVI-D OUT)• Connect using 24P DVI-D connection cord(available in stores).@6 S-Video output connector(S-VIDEO OUT)• Connect using an S-Video connection cord(available in stores).@7 Video output connector (VIDEO OUT)• Connect using the included video cord.@8 Component video output connectors(COMPONENT VIDEO OUT)• Connect using video cords (available instores).@9 21-pin SCART terminal (AV1)(For only European model)• Connect using a 21-pin SCART cable (availablein stores).#0 Power input (AC IN)• Connect to AC power supply using theincluded power supply cord.